Industry View category Archives - Page 14 of 65 - Inside GNSS - Global Navigation Satellite Systems Engineering, Policy, and Design

February 18, 2021

New GNSS-Independent Receiver Generates Nanosecond Timing, Meter-Level Accuracy from Low-Earth Orbit Satellite Signals

Jackson Labs Technologies, Inc. announced availability of the STL-2600 Satellite Timing and Location (STL) receiver designed in partnership with Satelles, Inc., the service provider of STL. This commercial receiver provides a completely GNSS-independent, low-cost capability to generate UTC nanosecond timing and meters-accurate positioning anywhere in the world

By Inside GNSS

January 27, 2021

Integrated Cellular and GNSS SiP in Miniature Form for Asset Tracking, Wearable and Healthcare Applications

u-blox announced the ALEX-R5, a miniature cellular module that integrates low-power wide-area (LPWA) connectivity and GNSS technology into an ultra-small system-in-package (SiP) form factor.

By Inside GNSS

[uam_ad id="183541"]

January 19, 2021

Updated Galileo ICD Previews New Features for Faster TTFF in 2023

The European GNSS Agency (GSA) released a new Galileo Open Service Signal in Space Interface Control Document (OS SIS ICD), the second issue of this document geared towards GNSS receiver manufacturers. Although the modified signals are not yet broadcast by Galileo satellites, the ICD will allow GNSS receiver manufacturers to prepare for the improved signals, set for debut in 2023.

By Inside GNSS

January 15, 2021

Assisted Boat Docking System Unveiled at CES Uses GPS-based Dynamic Positioning

Volvo Penta announced its Assisted Docking system, integrating GPS dynamic positioning, at the Consumer Electronics Show (CES). The Assisted Docking system gives the captain better control when docking a boat by automating his or her intentions, compensating for some dynamic variables, such as wind and current, and helping the vessel stay on its intended course.

By Inside GNSS

January 11, 2021

GNSS-Inertial Package for Delivery Robots and Drones

Parker LORD Microstrain Sensing debuted its new all-in-one navigation system this month, which includes onboard RTK and built-in dual antenna GNSS receivers.

By Inside GNSS

December 29, 2020

New Wave of GNSS-Driven Edge and Access Clocks for 5G Network Timing

ADVA launched a set network synchronization devices with enhanced capabilities for next-generation applications such as 5G. The latest Oscilloquartz products provide timing accuracy and resilience to edge networks. The OSA 5412 and 5422 offer precise phase, frequency and time-of-day synchronization and can be used for time-as-a-service applications.

By Inside GNSS

[uam_ad id="183541"]

December 28, 2020

Precision GNSS Module for Industrial, Last-Mile and IoT Platforms

Swift Navigation announced the availability of its Precision GNSS Module (PGM), designed to offer fast evaluation and a quick path to production for those requiring a precise positioning solution.

By Inside GNSS

Antennas for Iridium STL PNT Signal and for GNSS-Based Timing

Tallysman Wireless introduced two lightweight, compact active Iridium helical antennas: the housed HC610 and the embedded HC610E. They receive the Iridium Satellite Time and Location (STL) signals, used by STL terminals to provide worldwide position, navigation, and timing independent of GPS/GNSS

By Inside GNSS

December 18, 2020

Software Gives Vertical Position within Buildings for Wireless, Emergency Services

A software development kit for vertical positioning within multistory buildings enhances first responder safety, makes decision-making more efficient, and improves situational awareness.

By Inside GNSS

December 8, 2020

New Multi-GNSS+Inertial Positioning Solution for Nearshore Environment

Hexagon | NovAtel has released the new MarinePak7 GNSS+inertial receiver that delivers precise positioning and timing for demanding nearshore marine applications. It is certified for the marine environment and designed for hydrographic survey, marine construction and nearshore renewable energy operations.

By Inside GNSS

November 26, 2020

Rail Antennas Updated for Multi-Constellation GNSS

Huber+Suhner, a global supplier of optical and electricity connectivity solutions, updated its range of SENCITY Rail antennas to receive signals from all four GNSS: BeiDou, Galileo, GPS and GLONASS.

By Inside GNSS

November 19, 2020

RTK From the Sky Brings Instant GNSS Accuracy Worldwide; PPP Has Become RTK

The latest release from Hexagon promises precise point positioning (PPP) convergence in less than a minute for centimeter-level accuracy on land, air and marine applications around the world.

By Inside GNSS

« Previous 1 … 12 13 14 15 16 … 65 Next »

Industry View category

Compact, High-Precision MCMF GNSS Receiver Module Targets IoT App...

High-Performance Accelerometer for Severe Temperatures and Vibrat...

New GNSS-Independent Receiver Generates Nanosecond Timing, Meter-Level Accuracy from Low-Earth Orbit Satellite Signals

Integrated Cellular and GNSS SiP in Miniature Form for Asset Tracking, Wearable and Healthcare Applications

Consumer-Grade GNSS RF Front End Integrates Typically Discrete Components for Smaller Device Footprint

Updated Galileo ICD Previews New Features for Faster TTFF in 2023

Assisted Boat Docking System Unveiled at CES Uses GPS-based Dynamic Positioning

GNSS-Inertial Package for Delivery Robots and Drones

New Wave of GNSS-Driven Edge and Access Clocks for 5G Network Timing

Precision GNSS Module for Industrial, Last-Mile and IoT Platforms

Antennas for Iridium STL PNT Signal and for GNSS-Based Timing

Software Gives Vertical Position within Buildings for Wireless, Emergency Services

New Multi-GNSS+Inertial Positioning Solution for Nearshore Environment

Rail Antennas Updated for Multi-Constellation GNSS

RTK From the Sky Brings Instant GNSS Accuracy Worldwide; PPP Has Become RTK