U.S. DOT GPS/GNSS Adjacent Band Compatibility Assessment Workshop V - Inside GNSS - Global Navigation Satellite Systems Engineering, Policy, and Design

U.S. DOT GPS/GNSS Adjacent Band Compatibility Assessment Workshop V

A U.S. Transportation Department (DoT) public workshop will address GNSS receiver testing results October 14, 2016 at RTCA, Inc., 1150 18th ST NW, Suite 910, in Washington, DC.

The event begins at 10 a.m. and ends at 4 p.m.EDT.

Workshop members, as part of DoT’s fifth GPS Adjacent Band Compatibility Assessment (ABC) effort, will discuss GNSS receiver testing that includes non-certified aviation, cellular, general location and navigation, high precision and networks, timing, and space-based receivers, the agency said.

A U.S. Transportation Department (DoT) public workshop will address GNSS receiver testing results October 14, 2016 at RTCA, Inc., 1150 18th ST NW, Suite 910, in Washington, DC.

The event begins at 10 a.m. and ends at 4 p.m.EDT.

Workshop members, as part of DoT’s fifth GPS Adjacent Band Compatibility Assessment (ABC) effort, will discuss GNSS receiver testing that includes non-certified aviation, cellular, general location and navigation, high precision and networks, timing, and space-based receivers, the agency said.

The event is open to the public, but participants are required to register by October 11, 2016.

For additional information contact Stephen M. Mackey at the email listed below.

IGM_e-news_subscribe