New Builds

October 29, 2014

KCS Launches OEM TraceME Tracking Module

KCS TM-202LAR GPS/RF/GSM module

KCS bv, based in Dordrecht, The Netherlands, has introduced the newest OEM addition to its family of TraceME products, the TM-202LAR, a GPS/RF/GSM module intended for incorporation into products and systems used for tracking people, vehicles, and objects.

Measuring 46x21x6.5 millimeters and weighing seven grams, the low-power TM-202LAR incorporates a 48-channel CSR SiRFstar-IV GSD4e GPS L1 receiver, GPRS/GSM modem (QUAD band version) for RF connectivity up to two kilometers (1.2 miles), and a 3D magnetic compass and 3D accelerometer the operates at up to 16g.
 

Read More >

By Inside GNSS
October 16, 2014

Raytheon UK Announces Upgraded GPS Anti-Jam Technology

Raytheon UK launched a new enhanced version of its battlefield GPS L1/L2 anti-jam (GPS-AJ) capability, Landshield, this week (October 13–15) at the annual conference of the Association of the U.S. Army (AUSA 2014) in Washington, D.C.

A multi-element antenna with the anti-jam processing in a single small “one-box” form factor that interfaces at the RF level, Landshield is designed to enable GPS equipment to function unimpaired against a full range of hostile jammer types including narrow band, broadband, continuous wave, pulse, swept, and spectrally matched.

Read More >

By Inside GNSS
[uam_ad id="183541"]
October 8, 2014

OxTS Offers Lightweight INS OEM Board

xOEM500

Oxford Technical Solutions Ltd. (OxTS) has announced its first inertial navigation OEM board set with integrated GNSS — the xOEM500, which the company is promoting at this week’s (October 7–9, 2014) Intergeo trade show in Berlin, Germany.

Read More >

By Inside GNSS
October 1, 2014

VectorNav Introduces Dual-Antenna GPS/Inertial MEMS Unit

VectorNav VN-300 GPS/MEMS IMU

VectorNav Technologies, now based in Dallas, Texas, offers the VN-30, a miniature dual GPS-aided inertial navigation system that combines MEMS inertial sensors, two high-sensitivity GPS receivers, and an onboard extended Kalman filter algorithms to provide estimates of position, velocity, and orientation for industrial applications.

Read More >

By Inside GNSS

Sensonor Upgrades MEMS IMU; STIM300 Featured in NovAtel, Norbit Systems

Sidescan image of Norbit Seahorse

Sensonor has announced new features for its STIM300, a small, lightweight micro-electro-mechanical system (MEMS) inertial measurement unit (IMU) that provides non-GPS–aided positioning in multiple domains.

The STIM300 — which can be used underwater, on land and sea, and in aeronautic and astronautic applications — now has real-time g-compensation in al axes and supports rates of up to 2000 degrees/second.

Read More >

By Inside GNSS
[uam_ad id="183541"]

KVH Launches 2 FOG IMUs

KVH Industries, Inc., headquartered in Middletown, Rhode Island, has introduced the 1725 Inertial Measurement Unit (IMU) and the 1775 IMU, advanced sensors designed to be integrated into a range of stabilization, pointing, and navigation applications.

The new products complement KVH’s 1750 IMU and create a range of choices for advanced six-degrees-of-freedom (6DOF) sensors with enhanced performance. All three products utilize the  E•Core ThinFiber technology of KVH’s DSP-1750 fiber optic gyro (FOG).

Read More >

By Inside GNSS

NovAtel Expands Pinwheel Antenna Product Line

NovAtel GPS-702-GG-HV

NovAtel Inc. has introduced the GPS-702-GG-HV to its line of high-performance Pinwheel antennas. Tracking L1/L2 GPS and L1/L2 GLONASS frequencies, customers can use the same antenna for GPS-only or dual-constellation applications, reducing equipment costs and need for future redesign. With the same form factor and choke ring performance as the company’s other Pinwheel antennas, the GPS-702-GG-HV has been enhanced to provide the robustness needed for use under high vibration conditions.

Read More >

By Inside GNSS

Topcon Launches Two UAS Mapping Systems

Topcon Positioning Group has released two unmanned aerial systems (UAS) for mapping — the Sirius Pro and Sirius Basic.  Both systems are designed to produce accurate solutions for the automated mapping of a wide range of sites — regardless of terrain — including construction sites, mines and quarries, and for use in land surveying, power line and pipeline inspection as well as precision agriculture field mapping.

Read More >

By Inside GNSS
September 4, 2014

GPS Networking Offers EMI Shielding for GPS/GNSS Splitters

GPS Networking, headquartered in Pueblo West, Colorado, has announced that it now offers electro-magnetic interference (EMI) shielding on its GPS/GNSS Splitters.

Interference between electronic components is an increasing issue as more wireless components are used to complete broadband systems. Reducing disturbance among separate frequencies through EMI shielding is a critical deliverable for project managers, says Eileen O’Halloran, general manager at GPS Networking

Read More >

By Inside GNSS
1 38 39 40 41 42 51
IGM_e-news_subscribe