Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Return to main article: "Galileo Altimetry Using AltBOC and RTK Techniques"
By Inside GNSS
Jürgen Dampf received his M.Sc. in aviation engineering at the University of Applied Sciences in Graz. Since 2012 he has worked for IFEN…
By Inside GNSS
Dr. Rigas Ioannides works at the TEC-ETN section in the RF Payload Systems Division at ESA-ESTEC in support of radionavigation activities and the…
By Inside GNSS
Dr. Giovanni Gamba is an R&D engineer for Qascom. He is involved in theoretical design and development of interference and spoofing detection, mitigation,…
By Inside GNSS
Alessandro Pozzobon is the founder and project manager of Qascom. He is coordinating different projects regarding GNSS and security with ESA, the GSA,…
By Inside GNSS
Dr. Andrea Dalla Chiara is a designer and project manager at Qascom. His focus is on GNSS simulators, receivers, and authentication techniques both…
By Inside GNSS
Carlo Sarto is computer scientist at Qascom. He is involved in the design and development of different projects regarding test bed developments and…
By Inside GNSS
Philip G. Mattos gained Bachelor’s and Master’s degrees in electronic engineering from Cambridge University, followed by Master’s degrees in telecoms and computer science…
By Inside GNSS
Equations 3, 4 & 5 Working Papers explore the technical and scientific themes that underpin GNSS programs and applications. This regular column is…
By Inside GNSS
FIGURE 1: Proposal to have a single chip GNSS receiver with additional pins to allow for the inclusion of an additional radio Q:…
By Inside GNSS
