receiver Archives - Page 13 of 17 - Inside GNSS - Global Navigation Satellite Systems Engineering, Policy, and Design

receiver

Thales Alenia Space Italia Wins Two Galileo Receiver Development Contracts
January 13, 2009

Thales Alenia Space Italia Wins Two Galileo Receiver Development Contracts

The European Space Agency (ESA) has awarded Thales Alenia Space Italia (TAS-Italia) two contracts for development of Galileo ground station receiver equipment.

One contract is for Galileo In-Orbit Validation Element (GIOVE) phase A/B ground station receivers capable of tracking the multiplex binary offset carrier (MBOC) signal that is common to both the Galileo Open Service (OS) and the new GPS L1 civil signal, which will be transmitted beginning with the GPS III generation of satellites.

Read More >

By Glen Gibbons
PCTEL Acquires Wi-Sys
January 6, 2009

PCTEL Acquires Wi-Sys

PCTEL, Inc., announced today (January 5) that it has acquired Wi-Sys Communications Inc., an Ottawa, Ontario, Canada–based company that specializes in GPS antenna and receiver technology. PCTEL will pay $2.1 million for Wi-Sys and plans to fully integrate the latter company’s operations into its Antenna Products Group (APG).

Read More >

By Glen Gibbons
[uam_ad id="183541"]
NovAtel Announces GNSS Smart Antenna for Machine Guidance
December 7, 2008

NovAtel Announces GNSS Smart Antenna for Machine Guidance

NovAtel has announced its new SMART-AG antenna, an L1 GPS + GLONASS receiver plus antenna system housed in a single, low profile, rugged enclosure, designed for manual guidance and auto steer installations.

SMART-AG features 14 GPS L1 channels, 12 GLONASS L1 channels, and two additional channels for satellite-based augmentation systems (SBAS) as well as two NMEA 0183 compatible RS-232 serial ports, an NMEA2000 compatible CAN port, plus built-in mounting magnets.

Read More >

By Inside GNSS
OnPOZ Precision Positioning Releases new GNSS Post-Processor with GLONASS Compatibility
November 25, 2008

OnPOZ Precision Positioning Releases new GNSS Post-Processor with GLONASS Compatibility

OnPOZ Precision Positioning, a VGI Solutions division, has announced its new EZSurv GNSS Post-Processing version that offers full compatibility with GLONASS satellite signals.

According to the Montreal, Quebec, Canada–based company, EZSurv is compatible with most of the raw GNSS data formats on the market. The software computes high-accuracy geodetic results, enabling seamless data postprocessing among different brands of GNSS receivers and as a companion software for high-precision GNSS OEM receivers.

Read More >

By Glen Gibbons
[uam_ad id="183541"]
Developer of first commercial GPS receiver honored by Institute of Navigation
September 24, 2008

Developer of first commercial GPS receiver honored by Institute of Navigation

Phi Ward with ION 2008 Kepler Award

Phillip W. Ward, a pioneer designer and developer of GPS receivers, received the lifetime achievement award from the Institute of Navigation at its annual GNSS conference on September 19 in Savannah, Georgia USA.

Ward was senior technical staff member at Texas Instruments Defense Systems and Electronics Group for more than 20 years, where he developed five generations of GPS receivers including, in 1982, the first to enter the commercial market: the TI 4100 NAVSTAR Navigator.

Read More >

By Inside GNSS
Quellan’s GPS Receiver Noise Canceller

Quellan’s GPS Receiver Noise Canceller

Quellan Inc., of Santa Clara, California, offers the QHx220 active RF noise canceller for GPS applications.

Like noise cancelling headphones, the QHx220 senses unwanted internal noise and applies an opposite signal to the receive path, using sophisticated high-speed analog techniques integrated on a single one square millimeter, low-power integrated circuit.

According to the company, the canceller provides up to 25dB of cancellation, 360º of phase coverage, and operates on a single 1.8V supply voltage.

Read More >

By Glen Gibbons
Trimble Announces New Precision Products, RolleiMetric Acquisition, and Saab JV

Trimble Announces New Precision Products, RolleiMetric Acquisition, and Saab JV


Trimble has announced its new GNSS reference receiver — the Trimble NetR8 — for precise scientific and network infrastructure applications. The NetR8 reference receiver has 76 channels and supports GPS L1, L2, L2C and L5 signals as well as GLONASS L1/L2 signals.

Four additional channels are dedicated to tracking space-based augmentation systems
(SBAS), including Wide Area Augmentation System (WAAS) in North
America, European Geostationary Navigation Overlay System (EGNOS) in
Europe, Multi-functional Satellite Augmentation System (MSAS) in Japan,
Omnistar services and others.

Read More >

By Glen Gibbons
1 … 11 12 13 14 15 … 17
IGM_e-news_subscribe