Industry View category Archives - Page 54 of 63 - Inside GNSS - Global Navigation Satellite Systems Engineering, Policy, and Design

Industry View category

Rakon Offers New Manta TCXO for GNSS Applications and High-sensitivity Communications
October 7, 2009

Rakon Offers New Manta TCXO for GNSS Applications and High-sensitivity Communications

Rakon, the New Zealand-based manufacturer of frequency timing solutions, has launched a new TCXO in its Manta Series.

The HT7500/HVT7500 temperature-controlled oscillator combines discrete design and ASIC compensation in a compact standard 7m x 5m x 1.9m SMD package. It offers high-quality stability and phase noise.

Advanced IC technology, using unique fifth-order compensation over wide temperature ranges (-40°C to 85°C), makes this TCXO suitable for GNSS applications and for use in precision GPS where low phase noise is required.

Read More >

By Inside GNSS
Leica Geosystems Announces New Measurement System

Leica Geosystems Announces New Measurement System

Leica Viva from Leica Geosystems is a new-generation measurement system that combines a number of technologies into a portfolio of total stations, GNSS receiver, system controllers and onboard software.

The Viva GNSS suite’s  GS10 and GS15 system controllers can be used for all tasks and setups for GNSS surveying and construction, including all-on-the-pole or backpack rover; mounted on a car, quad or boat; RTK field base station; and long term monitoring sensor.

Read More >

By Inside GNSS
[uam_ad id="183541"]
NovAtel Launches GPS / GLONASS Products at ION Conference

NovAtel Launches GPS / GLONASS Products at ION Conference

NovAtel OEMStar

NovAtel Inc. rolled out a series of new products and a firmware upgrade at the Institute of Navigation’s ION GNSS 2009 conference held September 22-25 in Savannah, Georgia, USA.

The Calgary, Alberta, Canada–based GNSS manufacturer announced the launch of their new single-frequency GNSS receiver, OEMStar. The low-cost, 14-channel, L1 receiver measures 46 x 71 millimeters and consumes just 750 milliwatts of power when tracking both GPS and GLONASS signals.

Read More >

By Inside GNSS
Aerospace Engineer Penina Axelrad Receives ION Kepler Award
September 29, 2009

Aerospace Engineer Penina Axelrad Receives ION Kepler Award

Penina Axelrad and ION Kepler Award

Penina "Penny" Axelrad, University of Clorado professor of aerospace engineering sciences, has received the Johannes Kepler Lifetime Achievement Award from the Institute of Navigation (ION) Satellite Division.

The institute made the award on the final day (September 25) of its ION GNSS 2009 conference held in Savannah, Georgia.

Read More >

By Inside GNSS
[uam_ad id="183541"]
u-blox Software Will Support Microsoft Windows 7 Location API
September 16, 2009

u-blox Software Will Support Microsoft Windows 7 Location API

u-blox has its support of Microsoft Corp.’s initiative to facilitate development of location-aware applications on Windows 7.

Through the release of u-blox’ driver supporting Microsoft’s Sensor and Location application programming interface (API), software developers will have a standardized interface to the entire line of u-blox GPS chips and modules, according to Michael Ammann, u-blox’s vice-president of embedded software. The Sensor and Location platform for Windows 7 provides a simple way to access data from a wide range of external sensors.

Read More >

By Inside GNSS
Anritsu Selects IFEN GNSS RF Simulator for A-GPS Testing

Anritsu Selects IFEN GNSS RF Simulator for A-GPS Testing

Anritsu Corporation, a Japanese manufacturer of test and measurement equipment, has selected IFEN’s NavX-NCS Standard GNSS simulator as its assisted-GPS (A-GPS) test system for use in developing mobile terminals.

The NavX-NCS is a GNSS RF navigation constellation simulator capable of simulataneously simulating signals from up to nine L-band frequencies in the GPS, Galileo, GLONASS (including its new G1 frequency), and QZSS systems.

Read More >

By Inside GNSS
u-blox Launches Ultra-Low Power u-blox 6 for Battery-Driven Applications
September 1, 2009

u-blox Launches Ultra-Low Power u-blox 6 for Battery-Driven Applications

Thalwil, Switzerland–based embedded GNSS receiver provider u-blox has announced the upgrade of its core CMOS technology to u-blox 6, with substantially reduced power requirements as the result of new "intelligent," user-selectable power management features. According to the company, these innovations enable significantly extended battery life for power-critical GPS applications.

Read More >

By Inside GNSS
1 … 52 53 54 55 56 … 63
IGM_e-news_subscribe