Global Navigation Satellite Systems Engineering, Policy, and Design
Global Navigation Satellite Systems Engineering, Policy, and Design
Yutaka Mochizuki is a chief engineer at Honda R&D Americas, Inc. in Southfield, Michigan, investigating cooperative vehicle safety applications using dedicated short range…
By Inside GNSS
Zeljko Popovic is a research engineer at Honda R&D Americas, Inc. in Southfield, Michigan, investigating GPS positioning performance in obstructed environments for the…
By Inside GNSS
Robert Watson received B.Eng. and Ph.D. degrees in electronic engineering from the University of Essex, Colchester, UK. From 1995–1998 he was a senior…
By Inside GNSS
Jenna R. Tong is a postdoctoral researcher at the Electronic and Electrical Engineering Department at the University of Bath. Her first degree was…
By Inside GNSS
Mark Greaves is one of two geodetic analysts at Ordnance Survey. He holds an M.Sc. in engineering surveying and geodesy and is a…
By Inside GNSS
Paul Cruddace is the geodesy and positioning manager at Ordnance Survey, Great Britain’s national mapping agency. He is responsible for the development and…
By Inside GNSS
Willard Marquis is a senior staff systems engineer with the GPS IIR and GPS III Flight Operations Group, Lockheed Martin Space Systems Company.
By Inside GNSS
Chris Goodall is a co-founder and the vice-president, applications, at Trusted Positioning Inc., Calgary, Alberta, Canada. He has been working in developing, deploying…
By Inside GNSS
First, let’s review the record of presidential leadership in GPS. In 1983, following the shooting down of an errant Korean airliner over Soviet…
By Inside GNSS
The Galileo In-Orbit Validation (IOV) ProtoFlight Model (PFM) and Flight Models (FM-2, FM-3 and FM-4) undergoing assembly and testing at Thales Alenia Space’s…
By Inside GNSS
LightSquared told a congressional committee today (September 8, 2011) that it would limit the on-the-ground power of its signals to avoid overpowering GPS…
By Inside GNSS
Equation 1 Q: How does measurement differencing affect my computed position? A: The short answer is, “That depends.” Standalone, or undifferenced, measurements obviously…
By Inside GNSS
