Inside GNSS: Engineering Solutions from the Global Navigation Satellite System Community
GPS Galileo Glonass Compass Regional/Augmentation
Fig 2.jpg
(Click image to enlarge.)

Figure 2: Synthetic Aperture GPS Signal Processing

FIGURE 2: Beam steering with a one-dimensional phased array: phase delays are applied to individual antenna outputs to steer the beam in the direction of θ0, the beam width is inversely proportional to the number of array elements (N).

Share via:  SlashdotSlashdot    TechnoratiTechnorati    (Inside GNSS)TwitterTwitter

Return to main article: "Synthetic Aperture GPS Signal Processing"

Copyright © 2009 Gibbons Media & Research LLC, all rights reserved.

Hemisphere GPS
E-Library
Signals
ESA 2010
NavtechGPS
OxTS
GNSS Solutions
Topcon
Septentrio
NaviForum
LabSat
Geospatial World Forum
Subscribe to Inside GNSS
globe Copyright © Gibbons Media & Research LLC. All rights reserved.
1574 Coburg Road No. 233 • Eugene, Oregon 97401-4802 • United States
Telephone 408-216-7561 • Fax 408-216-7525

Problems viewing this page? Contact our webmaster.